Building A Desk With Drawers

The nest is to attach and screw the sliding hardware on the underside of the desk. Install The Desk Drawers.

How To Build A Reclaimed Wood Office Desk Reclaimed Wood Desk Diy Wood Desk Reclaimed Wood Office Desk

Attach the flat or beadboard panels to the open areas on the DIY Kids Desk Plans with Storage with the finish side facing out.

Building a desk with drawers. Complete the base then glue and nail the front. Ad Separation is required. Build the aprons out of 24 lumber and drill pocket holes at both ends.

For a 2 ft 061 m x 4 ft 12 m desk you would simply cut two 8 ft 24 m 2x6 boards in half lengthwise to get four pieces that you can then assemble into a single plane. Cut rabbets at both ends of the 2 sides. Then I used my miter saw to cut two pieces to the full depth of the drawer 1575 for my desk and two pieces to the width of the drawer well minus two inches 245 for my desk.

Place the drawer on the underside of the desk where you want it to be positioned when it is closed. Glue and brad-nail the sides to the back. Trace the drawer on the underside of the desk.

2448 pine project board for the desk top. Using a DrillDriver create two pilot holes. At last screw the bottom of the drawer to the frame.

Trace around it with a pencil when it is in the right spot. Cut grooves on the front back and sides to fit the base. Ad Separation is required.

Install the drawer pull then attach the drawer face. Glue and screw down the frame together. As you can easily notice in the plans we recommend you to build the legs out of 22 lumber as well as the bottom support.

Thats it the six basic steps to building a drawer. This wooden desk is beautiful and easy to make using my DIY Desk Plans Full Video Tutorial and Plans. Use wood glue a brad nailer and moulding to hold the panels.

How To Build The Desk Drawer I used 12-inch plywood to build the sides of the drawer box and using my table saw I cut the drawer sides 275 inches high. Learn How to Build a Desk with Drawers. These marks will help you install the sliding hardware in the correct position.

IKEA rast dresser here is the tutorial to give it the antique printers cabinet look or any small dresser. Drill sheetrock and wood screws level. Begin the process by tracing the drawer on the underside of the desk.

12 board cut to 24 for the wall cleat. How to make a DIY wood desk with drawers. Using a tape measure and a pencil make two marks 4 inches from the ends of the board and centered on its width.

Materials needed for a simple diy corner desk. Building a desk with drawers. The first step of the project is to build the sides of the sides of the desk.

Place the 16 drawer face on the work surface with the pocket holes facing down.

Diy Storage Desk For Home Office Building Plans And Tutorial